 |
—— Efim Nehoroshkov
Product Details:
Payment & Shipping Terms:
|
| Flow: | 5-500m3/h | Head: | 10-70m |
|---|---|---|---|
| Shaft: | Long Shaft | Feature: | Corrosion Resistant |
| Pump Sizes: | 160mm~650mm | Name: | Submerged Pump |
| High Light: | vertical submersible centrifugal pumps,vertical long shaft pump |
||
Centrifugal Industrial High Volume Submersible Pump Anticorrosive for Industrial Medium
Product Feature
ZAL-series pump is single stage, single-suction, vertical submerged centrifugal pump with Long shaft. This pump is designed according to standard IS05199. Pump shaft is supported by sliding bearings in pump cover and sliding bearing body; upper bearing adopts anti-abrasive bearing and lubricated by lithium base grease.
Application
It is mainly used to pump all kinds of strong corrosive medium such as high-temperature concentrated sulfuric acid. Mainly used in industries of sulphuric acid, pyrites acid waste acid recovery, flue gas desulfurization acid recovery, sulphur recovery and other high temperature medium in chemical process.
Operation Data
Discharge Size:32mm~200mm
Inlet Size:50mm~250mm
Capacity:5～500 m³/h
Head:10 ~ 70m
Seal Type:packing seal
Technical Parameter
| Model | rotate speed n=2950r/min | rotate speed n=1475r/min | ||||||
| Flow (m3/h) | Head (m) | ρ=1 | ρ=1.35 |
Flow (m3/h) |
Head (m) |
ρ=1 | ρ=1.35 | |
| Motor power (KW) |
Motor power (KW) |
|||||||
| ZAL25-200 | 7.5-11.5 | 28-49 | 2.2-5.5 | 3-7.5 | 4-5.8 | 6.5-12 | 0.75-1.1 | 0.75-1.1 |
| ZAL25-250 | 10.8-12.5 | 46-78 | 5.5-11 | 7.5-15 | 5.4-6.3 | 11.5-19.5 | 1.1-1.5 | 1.5-2.2 |
| ZAL25-315 | 15.3-20 | 74-130 | 15-30 | 22-37 | 7.6-10 | 18.5-32 | 2.2-3 | 2.2-4 |
| ZAL40-160 | 20-28 | 16-33 | 2.2-5.5 | 3-7.5 | 9.5-14 | 4.5-8 | 0.75-1.1 | 0.75-1.1 |
| ZAL40-200 | 18-29 | 20-53 | 4-11 | 5.5-15 | 9.5-14.5 | 7-13 | 1.1-1.5 | 1.1-2.2 |
| ZAL40-250 | 21-32 | 47-78 | 7.5-18.5 | 11-22 | 10.5-16 | 11-19.5 | 1.1-3 | 1.5-4 |
| ZAL40-315 | 29-42 | 61-115 | 15-37 | 22-45 | 15-21 | 15-29 | 3-5.5 | 4-7.5 |
| ZAL50-160 | 31-50 | 17-34 | 3-11 | 4-15 | 16.5-25 | 4-8.4 | 0.75-1.5 | 1.1-2.2 |
| ZAL50-200 | 43-62 | 28-82 | 7.5-18.5 | 11-22 | 22-31 | 7-13 | 1.1-3 | 1.5-3 |
| ZAL50-250 | 50-70 | 45-82 | 15-30 | 18.5-37 | 26-35 | 11-20 | 2.2-4 | 3-5.5 |
| ZAL50-315 | 57-87 | 57-115 | 22-55 | 30-75 | 30-44 | 14-28 | 3-11 | 4-11 |
| ZAL50-400 | 60-82 | 102-194 | 45-110 | 75-160 | 30-41 | 25-48 | 7.5-15 | 11-22 |
| ZAL80-160 | 66-94 | 17-32 | 5.5-15 | 7.5-18.5 | 34-47 | 4-8 | 1.1-2.2 | 1.1-3 |
| ZAL80-200 | 70-103 | 30-54 | 11-30 | 15-37 | 36-51 | 7.5-12.5 | 1.5-4 | 2.2-5.5 |
| ZAL80-250 | 87-127 | 45-82 | 22-45 | 30-75 | 46-64 | 11-20 | 3-7.5 | 4-11 |
| ZAL40-315 | 90-141 | 74-127 | 37-90 | 45-132 | 45-70 | 18-33 | 5.5-15 | 7.5-18.5 |
| ZAL80-400 | 116-171 | 95-187 | 75-160 | 90-220 | 53-85 | 25-46 | 11-22 | 15-30 |
| ZAL100-160 | 110-162 | 12-29 | 7.5-22 | 11-30 | 55-81 | 3-7.2 | 1.1-3 | 1.5-4 |
| ZAL100-200 | 135-193 | 26-50 | 18.5-45 | 30-55 | 70-95 | 6-12.5 | 3-5.5 | 3-7.5 |
| ZAL100-250 | 170-230 | 44-79 | 37-75 | 45-90 | 90-115 | 10-20 | 5.5-11 | 7.5-15 |
| ZAL100-315 | 170-250 | 71-126 | 75-132 | 75-200 | 86-125 | 17.5-31 | 11-18.5 | 11-30 |
| ZAL100-400 | 224-300 | 105-194 | 110-250 | 160-355 | 115-150 | 26-48 | 15-37 | 22-45 |
| ZAL150-250 | 310-190 | 40-74 | 55-110 | 75-160 | 155-195 | 10-18.5 | 11-15 | 11-22 |
| ZAL150-315 | 310-442 | 68-125 | 90-250 | 132-355 | 150-220 | 17-32.5 | 15-30 | 18.5-45 |
| ZAL150-400 | 400-520 | 113-502 | 200-400 | 280-500 | 200-260 | 28-51 | 30-55 | 37-75 |
| ZAL150-500 | 208-300 | 45-77 | 45-110 | 75-132 | ||||
| ZAL150-630 | 220-360 | 60-115 | 75-200 | 110-250 | ||||
| ZAL200-250 | 470-610 | 32-72 | 75-160 | 90-220 | 240-305 | 8-17.5 | 11-22 | 15-30 |
| ZAL200-315 | 480-710 | 65-122 | 132-355 | 185-450 | 350-350 | 15-30 | 18.5-45 | 22-55 |
| ZAL200-500 | 330-495 | 48-84 | 75-185 | 90-220 | ||||
| ZAL200-560 | 350-540 | 62-105 | 110-250 | 132-355 | ||||
| ZAL200-630 | 372-580 | 75-132 | 132-315 | 185-450 | ||||
| ZAL250-315 | 424-545 | 13-27 | 30-55 | 37-75 | ||||
| ZAL250-400 | 500-660 | 24-49 | 53-132 | 75-160 | ||||
| ZAL250-500 | 630-800 | 42-82 | 110-280 | 160-400 | ||||
| ZAL250-560 | 665-860 | 57-106 | 160-400 | 250-560 | ||||
| ZAL300-400 | 780-1050 | 26-48 | 90-200 | 132-280 | ||||
| ZAL300-500 | 870-1240 | 42-78 | 160-450 | 250-560 | ||||
| ZAL300-560 | 950-1340 | 56-104 | 280-560 | 400-800 | ||||
| ZAL300-630 | 950-1450 | 75-132 | 355-1000 | 500-1400 | ||||
| ZAL300-500 | 1300-1870 | 38-74 | 220-630 | 315-1000 | ||||
| ZAL300-560 | 1500-2040 | 54-98 | 355-900 | 500-1250 | ||||
FAQ
1.Question: How about delivery time?
Answer: It takes about 20-60 days for production.
2.Question: What's your payment term?
Answer: 30% T/T in advance, 70% paid before delivery.
L/C at sight
Western Union
3.Question: What materials of pumps you can produce?
Answer: We can use materials such as Ni-Hard alloy, 1Cr18Ni9Ti, 304L, CW-2, 316L, 904L, CD4MCu, MM-4, 2507, double-phase steel series, J-1 alloy, JM3, JM6, Kazak B, C alloy, Monel alloy, Ti, Ni alloy.
4. Queation: Firstly we should know from you:
Answer: What is the fluid?
Clean water (temperature), dirty water (temperature), particles, or slurry?
What is the flow and head? What is the motor power?
What is the voltage and frequency of three phase electricity?
Other conditions from customer possible: pump type, motor?
With complete information, then we select the pump and feed back to you.
Contact Person: Cecile
Tel: 0086-19180408652
