Product Details:
Payment & Shipping Terms:
|
| Max Flow: | 3000m³/h | Min Flow: | 4m³/h |
|---|---|---|---|
| Man Head: | 130 | Min Head: | 10 M |
| Pressure: | High Pressure | Warranty: | One Year |
| Voltage: | 380V Or Higher | Type: | Heavy Duty |
| Highlight: | horizontal centrifugal slurry pump,industrial sludge pump |
||
Anti - Abrasive Split Case Horizontal Slurry Pump , Centrifugal Mining Mud Sewage Sludge Pump
Advantanges
1) High concentration, volume concentration reach to 60%, weight concentration reach to 70%;
2) Comprehensive performance is good, high head: long distance and high head transportion, single set head can reach to max 130m, and can be used in series to satisfy much higher head requirements;
3) High flow rate capacity: can be reached 3000m3/h;
4) Good passing ability:gravel pump max passing particles size is 20mm;
5) Diameter size:200mm~470mm
6) High corrosion, abrasion resistance widely material optional: metal flow parts including:A05 (Cr27Mo), A33(Cr30MoNi), A49(Cr30MoNiCu) and rubber material etc. PH value 1.0-14.
7) Easy operation, lower noise.
Technical Range
 |
Model: ZJ-series horizontal slurry pump |
| Discharge Size: 20mm~350mm | |
| Inlet Size: 32mm~400mm | |
| Capacity: 4 ~ 3000 m³/h | |
| Head: 10 ~ 130 m | |
| Maximal Efficiency: 70% | |
| NPSH: 0m~3m | |
| Allowable Max Motor Power: 315 kw | |
| Impeller | Allowed Max Particle Size: 20 mm |
| Vanes: 5/6 | Seal Type: step-down dynamic seal |
| Type: closed/ half open | Pump Weight:up to 3000kg |
| Material:Metal (according to working conditions ) | RPM: 1450 r/min |
|
MINERAL PROCESSING |
Rigid structure design, wear-resistant materials, low running speed. The pump is suitable for transfering rough minerals and tailings. |
|
SAND WASHING & SAND PLANT |
a variety of abrasion and corrosion resistant materials are available. |
|
COAL-WASHING |
Widely used to transport highly abrasive heavy media and concentrated downstream media. |
Details
Contact Person: Cecile
Tel: 0086-19180408652
Fax: 86-28-6853-2101
