Bracket Support Structure Industrial Chemical Pumps , Chemical Circulating Pump

Bracket Support Structure Industrial Chemical Pumps , Chemical Circulating Pump

Brief Introduction

The most common types of chemical pumps are centrifugal pumps which moves fluid by a creating a vacuum using a rotating impeller.

Chemical pumps available in Centrifugal, Sealed and Magnetic along with positive displacement Gear and Diaphragm pumps. Also available are chemical Drum pumps, injection Metering and Hand operated.

Our pumps are cntrifugal, electric motor driven chemcial process pump.They have the following features:

• The volute casing or chamber is where the impeller sits inside. Often the discharge and suction parts are moulded (cast) or connected to the volute in some way. Inside you will find where the impeller sits. WD-series industrial chemical pump adopts radial split, rear door, single stage single suction volute structure.
• Centrifugal pump designs also play a big part in how it will perform. There are very many centrifugal pump designs all created to suit various needs. You should note that the designs vary with different models such as horizontal multistage pumps, double suction pumps, regenerative pumps, self-priming pumps etc. The following is needed to design the pump:

1. Medium(Fluid being pumped)
2. Capacity/flow
3. Discharge pressure or head (this takes into account the pipe size and length)
4. If you know how to read centrifugal pump curves, it will be better.

Features

1. Radial split, rear door, single stage single suction volute centrifugal pump

2. Impeller has multi types: closed, semi-open, fully open, swirling structure

3. Back blades is used to balance axial forces and prevent solid particles from entering the seal

4. The volute of the pump is a suction end, a tangential outlet, and a cantilever support structure.

5. The bearing body is lubricated with grease or oil

6. Shaft seals can be mechanical seals or vice impeller + packing dynamic seal

Technical Data

Product Details

Impeller	Close Impeller	It is suitable for clean liquids, liquids contain thin solid particles, thin liquors
	Open Impeller	It is suitable for clean liquids, liquids contain thin solid particle, abrasive liquids, slurries and paper stock up to 8% consistency.
Mechanical Seal	Double Mechanical Seal	low maintenance cost no leakage, low friction loss no running- in needed requires less sealing water than gland long service life
	Single Mechanical Seal	low maintenance cost no leakage, low friction loss no running- in needed no require external sealing water longer service life than double mechanical seal

Application

• Delivery medium: Corrosive Chemical Pump for various temperature and concentration of sulfuric acid, nitric acid, hydrochloric acid and phosphoric acid and other inorganic acids and organic acids.

• Various temperature and concentration of sodium hydroxide and sodium carbonate and other basic solutions, all kinds of salt solution, a variety of liquid petroleum products, organic compounds, as well as other corrosive materials and products.

• At present, the corrosion resistant materials of our factory can meet the requirements of all kinds of medium. When ordering, please provide the details of the media.