 |
—— Efim Nehoroshkov
Product Details:
Payment & Shipping Terms:
|
| Max Flow: | 13000m3/h | Max Head: | 8m |
|---|---|---|---|
| DN: | 300-1100mm | Structure: | Single-stage Pump |
| Certification: | ISO9001 | Material: | Cast Iron Or Stainless Steel |
| High Light: | axial flow propeller pumps,horizontal axial flow propeller pump |
||
Large Volume Propeller Pump with Axial-Flow/Mixed-Flow Motor Pump for Irrigation
Brief Introduction
There are three type s of centrifugal pump, including axial flow, mixed flow and radial flow. The axial pump working principle is that the fluid is pushed in a direction parallel to the shaft of the impeller in course of their flow through the pump, do not change their radial locations.. The axial flow pumps are featured by the highest flow rates and lowest head..
Technical Parameter
ZW-series Horizontal Axial Flow Pump
| No. | Model |
Flow m3/h |
Head m |
Rotating speed r/min |
Motor Power KW |
| 1 | ZW300 | 800-1000 | 2-8 | 600-1450 | 40-50 |
| 2 | ZW350 | 800-1200 | 2-6 | 600-1450 | 40-55 |
| 3 | ZW400 | 1000-2000 | 2-8 | 600-1000 | 45-60 |
| 4 | ZW500 | 1500-3200 | 2-7 | 570-980 | 50-65 |
| 5 | ZW600 | 2000-3500 | 2-7 | 300-750 | 50-65 |
| 6 | ZW700 | 3000-6000 | 2-7 | 300-600 | 60-70 |
| 7 | ZW760 | 4000-7600 | 2-6 | 300-600 | 60-70 |
| 8 | ZW820 | 5000-9000 | 2-5 | 200-500 | 60-73 |
| 9 | ZW1100 | 8000-13000 | 2-6.5 | 200-475 | 65-75 |
ZL-series Vertical Axial Flow Pump
| No. | Model |
Flow m3/h |
Head m |
Rotating speed r/min |
Motor Power KW |
| 1 | ZL300 | 500-800 | 2-8 | 600-1450 | 40-50 |
| 2 | ZL350 | 550-1000 | 2-8 | 600-1450 | 40-55 |
| 3 | Zl400 | 600-1600 | 2-8 | 600-1000 | 45-60 |
| 4 | ZL500 | 1200-2200 | 2-6 | 570-750 | 50-65 |
| 5 | ZL600 | 2000-3000 | 2-6 | 300-750 | 50-65 |
| 6 | ZL700 | 3000-6000 | 1-5 | 300-600 | 60-70 |
| 7 | ZL800 | 5000-9000 | 1-5 | 200-500 | 60-73 |
| 8 | ZL950 | 6000-11000 | 1-4 | 200-500 | 60-77 |
| 9 | ZL1050 | 8000-12000 | 1-4 | 100-400 | 64-77 |
| 10 | ZL1300 | 9000-15000 | 1-3 | 100-300 | 65-78 |
Structure
| 1 | Impeller nut | 8 | Packing room | 15 | coupling | 22 | framework oil seal | 29 | filler |
| 2 | Sealing cover | 9 | Bearing base | 16 | coupling | 23 | Lower bearing upper cover | 30 | Sealing cover |
| 3 | joint | 10 | framework oil seal | 17 | motor | 24 | Lower bearing lower cover | 31 | impeller |
| 4 | sheath | 11 | lower bearing | 18 | Round nut | 25 | Packing cover | ||
| 5 | shaft | 12 | base | 19 | upper bearing cover | 26 | nozzle | ||
| 6 | sleeve | 13 | Motor base | 20 | upper bearing | 27 | Water seal ring | ||
| 7 | Pump body | 14 | Oil pointer | 21 | Bearing case | 28 | Pump cover |
Features
1) Adopting excellent hydraulic model abroad and adopting advanced computer simulation analysis technology (Pro/E, CFD and other software platforms), the pump has excellent performance and high reliability and stability. It adopts foot support, cantilever rotor, excellent hydraulic structure, advanced shaft seal form, low speed type operation, not only the pump runs smoothly, but also the reliability is high. This type of pump has high efficiency, high efficiency zone and good anti-cavitation performance.
2) Fully absorb the advantages of axial flow pumps home and abroad, ZW-series axial pump has the feature of simple structure, convenient maintenance and reliable operation.
3) The material selection of the pump over-current component is reasonable. The material has long service life and meet the wear-resisting and corrosion-resistant requirements of the slurry for conveying different media conditions.
4) The shaft seal adopts two kinds of seal forms: packing seal and mechanical seal, which is convenient for the user to select the appropriate shaft seal form according to the actual situation.
Material Choose
Material choosen is one of the most important step to produce the pump. The material should not only be durable, but also abrasion resistance and corrosion resistance based on the working condition. Here are some material's description:
Cast iron provides high tensile strength, durability, and abrasion resistance corresponding to high pressure ratings.
Plastics are inexpensive and provide extensive resistance to corrosion and chemical attack.
Steel and stainless steel alloys provide protection against chemical and rust corrosion and have higher tensile strengths than plastics, corresponding to higher pressure ratings.
What's more, we also provide other material for you to choose: CD4MCu, Cr30, 304, 304L, 316, 316L, 904L (UB-6), 20# alloy
Product Picture
FAQ
1. Q: Are you a manufacturer or trading company?
A: We are a manufacturer established in 1995, professional manufacturer of chemical-process pump and energy-saving mixer with more than 20-year experience.
2. Q: What's your delivery time?
A: The batch order will be shipped within 40 working days after receiving deposit.
3. Q: What's your warranty service policy?
A: 12 Months for all products, and some products warranty is 24months.
4. Q: What information I need to offer for quotation?
A: Medium: ____________ PH: ________
Specific Gravity: _______ Temperature: _________
Capacity/Flow: ________m3/h Head: _________m
Voltage: ____________V Frequency: _________Hz
Power:_____________KW
5. Q: What is your minimum quantity?
A: One set is also welcomed to us.
Contact Person: Cecile
Tel: 0086-19180408652
